Pneumatic Glass Laminating High Temperature Autoclave With TPC
Control System And Wind Guiding Groove Sieve
Composite autoclave (series of SN-CGF)
|working temperature||100~400 degrees celsius|
|temeprature unformity||±1.0~±3.0 degrees celsius|
|temperature accuracy||±1.0 degrees celsius|
1. Uniform heat distribution and no blind angle for sterilization;
2. Preheat the process water in the upper storage vessel in
advance, shorten the sterilization time and improve the working
3. Process water can be used repeatedly, saving energy, time,
manpower, and reducing the production cost;
4. Short process time and high temperature preserve food flavor and
5. Perfect pressure control system, efficiently avoiding the
containers deformation and package break;
6. Continally monitor the temperature inside the retort, keeping
the temperature difference ±0.5℃;
7. Siemens PLC automatic control system and touch screen, easy to
8. System will make alarm calls automatically when the temperature,
the pressure, the water level, or any other kinds of error occur.
1. Canned Containers: tin can, aluminum can
2. Plastic Container: PP bottle, HDPE bottle
3. Soft package: Aluminum foil bag, transparent bag, vacuum bag,
retort pouches, doy-packs, ect.
Description and Working Principle:
The Water Immersion Retort is usually composed of upper vessel and
lower vessel. The top one is used to store preheated process water
and recycle the hot process water before cooling process. The
bottom one is the retort for sterilization.
After the food containers were loaded into the baskets and enter
the retort, the preheated process water is delivered into the
retort through water spreader on the top of retort, the water level
was controlled and monitored by water level gauge outside the
The steam enter the retort through the water spreader or additional
steam spreader and heat the process water continually until the
temperature rise to scheduled sterilization temperature.
The circulation pump recycle the hot water with a high speed and
assure the uniform heat distribution inside the retort.
After the sterilization is completed, the hot water will be
recycled to the top tank and stored for next batch sterilization.
Then the cooling water will be filled into the retort directly to
make the food container cool down.
Olymspan Glass Autoclave
to build system structure, more efficient and reasonable;
type wind guiding groove sieve OLYMSPAN unique design of
autoclave,autoclave can balance and strengthen the front and rear
important work area so that the airflow,autoclave internal space
can achieve excellent temperature uniformity; the bottom duct
installed in the heater and cooler,reasonable application of
reactor space, thereby reducting the heat and pressure of gas
demand. Reduce the operation cost.
High quality timber,high standard manufacturingm safer and more
OLYMSPAN autoclave adopts high quality nickel chromium alloy
heater,long spanlife,high electric heating conversion rate;hot air
circulation fan, using resistance special motor, easy handlyinh,
complete elimination of oil leakage, leakage risks; elelctrical
control of the use of international well-know brand products, can
provide a variety of CSA/3C UL/CE elelctrical safety standard
Aviation level control, continuous development and updating, more
convenient and reliable
OLYMSPAN autoclave is equipped with advanced technology of heat
control system(TPC). She drew a cariety a variety of control system
at home and aboard the advantages of complete fuction,stable and